Sony UP-D23MD - Manual (Page 18)

Mis
c
e
lla
neo
us
If the Paper Jams
18
If the Paper Jams
If the ALARM indicator lights on the front panel, or the
message “Paper jam. Printing is aborted. Please remove
the jammed paper and print again.” or “Motor or sensor
trouble. Printing is aborted after you press the PRINT
button and during printing. Please turn off the printer,
then turn it back on and print again.” appears on a
monitor of a computer during printing after you press
the PRINT button, the paper may have jammed inside
the printer.
Remove the jammed paper according to the process
described below.
Note
If you turn off the power of the printer, any images
stored in memory will be lost. After you finishing the
following operations and turning on the printer on again,
recapture the image into memory,
1
Remove the paper tray.
If any printouts have been ejected onto the paper
tray and have accumulated on the paper tray,
remove them before removing the paper tray.
2
Check whether any paper is jammed inside the
printer. If you find a jammed sheet, slowly pull it
straight out.
ALARM • The front panel is open.
tClose the front door
surely.
• Paper has jammed inside the
printer.
tRemove any jammed
paper from the printer.
(See page 18.)
• The maximum number of
printouts has accumulated
on the paper tray.
tRemove the printouts.
Printing starts again.
Indicators Possible cause and
remedies
Lighting Blinking