Sony UP-D23MD - Manual (Page 16)

Mis
c
e
lla
neo
us
Specifications
16
Specifications
Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input Current 1.8 A max. at 25°C
(for 100 to 120 V AC users)
1.0 A max. at 25°C
(for 220 to 240 V AC users)
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
20% to 80% (no condensation allowed)
Storage and transport temperature
–20°C to 60°C (–4°F to 140°F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Dimensions Approx. 212 Ч 125 Ч 395 mm (w/h/d)
(8 3/8 Ч 5 Ч 15 5/8 inches)
Mass Approx. 6.5 kg (14 lb 5 oz)
Printing system Sublimation heat transfer printing
Printable pixels When using the UPC-21S and printing
the full-image: 1520 × 1144 dots
When using the UPC-21L and printing
the full-image: 2000 × 1520 dots
Total gradation 256 levels each for yellow, magenta,
and cyan
Printing time When using the UPC-21S:
When the printer is set to high
speed: Approximately 19 seconds
When using the UPC-21L:
When the printer is set to high
speed: Approximately 29 seconds
Thermal head 15.87 dots/mm
(USB) connector
Universal Serial Bus (USB)
Specification Revision 2.0
Input connector AC IN (for power input)
Supplied accessories
Paper tray (1)
USB connecting cable (1)
Thermal head cleaning cartridge (1)
Stopper (1)
Software License Agreement (1)
Before Using this Printer (1)
CD-ROM (1)
Optional accessories
UPC-21L Color Printing Pack
UPC-21S Color Printing Pack
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of
flammable anesthetics or oxygen:
Not suitable for use in the presence
of flammable anesthetics or oxygen
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.