Voice dialling – Siemens Gigaset SL1 User Manual

Page 40

Step by Step

Conducting calls – enhanced functions

Deactivating speakerphone mode

You can deactivate speakerphone mode and switch to

handset mode during the call:

Press the Talk key.

Voice dialling

With the voice dialling function, you can dial a number

simply by saying the partner’s name. You do not need

to manually dial a phone number.

For this function, you will need to record a voice pattern,

in other words, your voice saying the name will be

saved in the handset. Up to four users can save a voice

pattern for each entry. The user must be identified, i.e.

as User 2, before recording.

A total of 29 voice patterns can be saved in Gigaset S1

professional and 23 voice patterns in Gigaset SL 1 pro-

fessional

for telephone directory entries. An entry that

has a corresponding voice pattern is marked with a

mouth in the voice telephone directory.

Recording a voice pattern for an existing telephone
directory entry

You should record your voice pattern in a quiet environ-

ment. There should be about 25 cm between you and

the handset.

Open telephone directory.

D E

Select the required entry.

Press the Display key.

D E

[

Select and confirm the menu item.

[

Press and confirm the Display key.

Say the name when the relevant prompt is displayed.

Repeat the name after being prompted again. The re-

cording will be saved automatically.

Note:

If you wish to replace the handset in the charg-

ing shell during a call, e. g. because the battery

is empty, hold down the Speakerphone key.

Voice

User 1
...

Record