Samsung SIR-T451 - Manual (Page 46)

CHAPTER FOUR
Special Features
4
4
46
Programming the Remote Control for Other Components
1
Press the SET button on the remote control. Use the number
buttons to enter the code by manufacturer.
(See tables on pages 46~48)
Each code must be three digits long. For example, to enter the
code “6,” press 0, 0, and 6. To enter the code “76,” press 0,
7, and 6.
See the remote control code tables on the following pages to
find the appropriate code for your particular component.
If more than one number is listed, try each one separately until
you find the one that works.