Sony MVS8000SF-C - Manual (Page 33)

1-25
MVS-8000SF
1-8. Checks on Completion of Installation
D6108
D6107
D6106
D6105
D6104
D6103
D6102
D6101
D6100
D6109
A B C D E F G H J K L M N P R
E6062
TP6800
TP6801
E6066
TP6000
E6069 TP6068
TP6060
TP6061
TP6802
E6064
1
2
3
4
5
6
7
8
9
10
11
12
13
D6001
D6065
D6060
D6062
D6063
D6061
CN6000
E6063
TP6067
E6065
TP6104
TP6103
TP6102
TP6101
A side/Component side
D6001 (A-5) : RESET status LED
System reset status indication.
Lit when the
+3.3 V power decreases.
D6060 (A-5) : + + + + +3.3 V
+3.3 V power supply status indication.
Lit when the
+3.3 V power is supplied.
D6061 (A-6), D6062 (A-5), D6063 (A-5) : + + + + +1.8 V
+1.8 V power supply status indication.
Lit when the
+1.8 V power is supplied.
D6065 (A-5) : + + + + +12 V
+12 V power supply status indication.
Lit when the
+12 V power is supplied.
If this LED does not light, the fuse may have blown.
4. KPC-16 board (MKS-8210HD/SD/M)
D6100 (A-10) : COMMON WASH FPGA CONFIG
DONE status LED
COMMON WASH FPGA CONFIG DONE status indica-
tion.
Not lit when configuration is completed.
D6101 (A-10) : WASH4 FPGA CONFIG DONE
status LED
WASH4 FPGA CONFIG DONE status indication.
Not lit when configuration is completed.
D6102 (A-10) : WASH3 FPGA CONFIG DONE
status LED
WASH3 FPGA CONFIG DONE status indication.
Not lit when configuration is completed.