Sony DAV-HDZ485 - Manual (Page 86)

86 US
The S-AIR function
No sound is output from the
system and TV while using the
System Audio Control function. • Set [AUDIO (HDMI)] in [HDMI SETUP] to [ON] (page 53).
• Make sure that the connected TV is compatible with the System Audio Control
function.
• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
(page 60).
Symptom Remedy
S-AIR connection is not
established (sound transmission
is not established), e.g., the
indicator of the S-AIR sub unit
does the following:
• Turns off.
• Flashes.
• Turns red.
• If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away
from the S-AIR main unit you are using.
• Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 65).
• Another S-AIR sub unit is paired to the S-AIR main unit. Pair the desired S-AIR
sub unit with the S-AIR main unit (page 67).
• Place so that the S-AIR main unit and S-AIR sub unit are separated from other
wireless devices.
• Avoid using any other wireless devices.
• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
No sound is heard from the
S-AIR sub unit. • If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away
from the S-AIR main unit you are using.
• Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 65).
• Confirm the pairing setting (page 67).
• Place so that the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Place so that the S-AIR main unit and S-AIR sub unit are separated from other
wireless devices.
• Avoid using any other wireless devices.
• Change the “RF CHANGE” setting (page 68).
• Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn on them.
There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away
from the S-AIR main unit you are using.
• Place so that the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Place so that the S-AIR main unit and S-AIR sub unit are separated from other
wireless devices.
• Avoid using any other wireless devices.
• Change the “RF CHANGE” setting (page 68).
• Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.
Symptom Remedy