Sony DAV-HDZ485 - Manual (Page 16)

16 US
Gettin
g
Star
ted
10
Attach the post to the base.
Insert the post so that the slot on the lower part of the post aligns with the projection of the base,
then secure the post with two screws (black).
Note
• Make sure that the slot on the post aligns with the projection of the base by rotating the post slightly.
Fully-assembled illustration
Base
Post
,
Slot
Projection
Screws
(black)
Pull the speaker cord in the direction of the
arrow so that it does not get caught when
attaching the post to the base.
White Red
Front left speaker (L):
White label Front right speaker (R):
Red label