Viewer auto setting all together – Sanyo 1AV4U19B25500 User Manual

Page 86

Text mode
Original mode

Chapter 7 Controlling the projector

Viewer auto setting all together

"Viewer auto display" can be set all together. Set "ON" the multi
control setting and select [3] Auto display from Viewer sub menu
(selected by ‘Multi-control’ - “Network Viewer” menu). Set the
display time periods and repeat times for the auto image display.
After clicking Start button, the registered projectors start playing
back the auto image display in sequential.

✐

For further information of the Auto display, see "Using the network

viewer function". (+p.124)

✐

This is effective only if the multi control item of the registered projector is

set to either "Control & Image" or "Image".