Sanyo 1AV4U19B25500 - Manual (Page 75)

Setting up the projector
Item Description
Factory default ................ Sets all of the projector control items to the factory
default setting except the following items.
Lamp Corres. Value, PJ time, Filter time, PIN code lock
and Logo PIN code lock.
No show .................... Sets the black out image temporarily.
Freeze......................... Sets the image to freeze mode.
P-Timer ......................Switches the P-Timer display.
ON .......... Starts P-Timer indication
STOP ...... Stops P-Timer counting
OFF ........ Stops P-Timer indication
Item Description
Lamp Corres. value ... Displays the use time (Corresponding value) of the
lamp and reset the counter.
Filter counter ........... Displays the filter use time. Reset the time after filter
clean-up.
Filter warning .......... Sets the time to indicate the filter warning message
on the screen.
Item Description
Key lock ..................... Sets the prohibition of controls either Projector or
Remote control.
Closed caption ........ Sets the closed caption function.
Closed caption .. Sets the closed caption mode. (OFF/CC1/CC2/CC3/
CC4)
Color ..................... Sets the color of the contents. (Color/White)
Fan .............................. Sets the cooling options after turning off.
L1 Normal cooling
L2 Silent cooling
Fan control ..............Sets the fan control speed.
Off Normal mode
On1 Highland mode 1
On2 Highland mode 2
On3 fan speed Max mode