Sanyo 1AV4U19B25500 - Manual (Page 35)

Chapter
35
This chapter describes the preparation for Wireless
LAN setting with projectors and how to set the LAN
environment.
This projector contains the Wireless LAN module.
The setting procedures and configurations differ
depending on the LAN installation location. Consult
your system administrator for installation and set the
LAN appropriately.
To operate via Wireless LAN, your computer has to
be equipped with a Wireless LAN card adapter which
supports IEEE 802.11b/g/n(DRAFT 2.0).
If connecting in Infrastructure mode with an access
point, the access point is required to support IEEE
802.11b/g/n(DRAFT 2.0).
Caution: Do not use a mobile phone or PHS near
(within 20cm/8inch) the projector. It may
cause malfunction.
5
. Wireless LAN configurations