Sanyo 1AV4U19B25500 - Manual (Page 108)

10
Chapter 8 Network capture functions
Unregister moderator status
1. Select the projector(s) which is registered as a moderator from the moderator mode application
window.
2. Click the Delete moderator's group button. Selected projector will be unregistered on a moderator,
and the application window changes "Normal mode". The column of status changes from "#On
Moderating" to "On Standby". When there are multiple projectors to unregister, the application
window maintains "Moderator mode" until all the registered moderator's groups are unregistered.
✳ Even after the moderator is unregistered, the application window of the Network Capture 5 appears
on the screen to indicate that the moderator function is unregistered.
✳ After terminating the Network Capture 5, all the clients joined in the session will be unregistered.
Moderator's password setting up
This enables you to set up the password to join in the moderator's group.
Start up the network Capture 5 and click
Parameter set up button on the application window. On the moderator
function setting item on the parameter set up window, set up the password of Moderator 's password . Up to 15
characters can be used for the password. Default password is blank.
Following password input window appears on the screen when the client clicks Join moderator's group button on
the application window to join in the moderator's group.
Enter a password and click OK button. When the password is authenticated correctly, the client can join in the
moderator's group. The input password is registered in the moderator's password of the client.