Sanyo 1AV4U19B25500 - Manual (Page 69)

System
This function is to select the system of signal input to the projector. The available system mode are
listed on the pull-down menu button according to the input signal. Select a system and then click Set
button.
✐ If the modes (Mode1 to Mode5) stored in the item "PC Adjustment" (+ p.72) are available, they are also listed
together with the above mode.
Controls
Available selection at the RGB(PC analog) input
Item Description
XGA1 .......................... It automatically switches to the proper computer
system of the input signal.
* The computer system modes (VGA, SVGA, XGA.
SXGA, UXGA, WXGA...) which meet the input signal
listed.
Available selection at the Video/S-video/Scart input
Item Description
AUTO .......................... It automatically switches to the proper color system of
the input signal.
* The selectable color systems are PAL, SECAM, NTSC,
NTSC4.43, PAL-M and PAL-N.
* AUTO is fixed at the Scart input.
Available selection at HDMI input
Item Description
D-480p ....................... It automatically switches to the proper scanning
system of the input signal.
* The selectable scanning systems are D-480i, D-575i,
D-480p, D-575p, D-720p, D-1080i and D-1080p.
D-XGA ........................ It automatically switches to the proper computer
system of the input signal.
* The computer system modes (D-VGA, D-SVGA,
D-XGA. D-SXGA1...) which meet the input signal
listed.
Available selection at the Component input
Item Description
AUTO .......................... It automatically switches to the proper scanning
system of the input signal.
* The selectable scanning systems are 480i, 575i, 480p,
575p, 720p, 1035i and 1080i.