Star Micronics SP300 Series User Manual

Page 58

Text mode
Original mode

– 54 –

FUNCTION

Trigger auto-cutter drive (Auto-cutting models only)

CODE

“d” “0” or “d” <0>
(1B)

(64)

(30)

or (1B)

(64)

(00)

“d” “1” or “d” <1>
(1B)

(64)

(31)

or (1B)

(64)

(01)

OUTLINE

This code causes the printer to trigger auto-cutter.

FUNCTION

Select validation printing (Models with validation function
only)

CODE

data
(1D)

data (0A)

OUTLINE

Prints up to 32 columns of the 7

9 (half dot) font size

characters on one line.

NOTE

(1) Character data and immediate execution command

_{are valid for data.}

(2) Printing modes (such as emphasized, inverted, expanded

character modes, etc.) which were set before validation
printing are invalid during validation printing. (These
modes become valid again after validation printing is
completed.)
(Refer to “5. VALIDATION PRINTING”)