Star Micronics SP300 Series User Manual
Page 49
– 45 –
FUNCTION
Select vertical expaned character mode
CODE
(1B)
H
(68)
H
(31)
H
or (1B)
H
(68)
H
(01)
H
OUTLINE
Prints characters two times the normal vertical size after the
code is received.
However, the bit image mode
are excluded.
NOTE
(1) When combined with the
printing of the characters in two times the normal vertical
and horizontal size.
(2) This code is not combined with the inverted print mode
(3) For the 6
×
12 dots IBM block graphic (the characters
code table (B0)
H
-(DF)
H
and (F4)
H
-(F5)
H
of IBM charac-
ter set #1 and #2) of the font construction, vertical
enlargement is not available.
(4) The relationship of the vertically enlarged character and
the normal character is matched at the lower level.
(5) Feed the paper a minimum of one line before printing
with this code.
FUNCTION
Cancel vertical expanded character mode
CODE
(1B)
H
(68)
H
(30)
H
or (1B)
H
(68)
H
(00)
H
OUTLINE
Cancels vertical expanded character mode