4. control codes used for graphics printing – Star Micronics SP300 Series User Manual

Page 45

– 41 –

7-4. Control Codes Used for Graphics Printing

FUNCTION

Set 7/72-inch line feed

CODE

“1”
(1B)

(31)

OUTLINE

Line feed is set at 7/72-inch after this code is received.

FUNCTION

Define n/72-inch line feed

CODE

“A” n
(1B)H (41)H n

DEFINITION RANGE

85 (Default n = 12)

OUTLINE

Line feed is defined at n/72-inch after this code is received.
This code sets the feed at n/72-inch with the “2” code.

FUNCTION

Set n/72-inch line feed

CODE

“2”
(1B)

(32)

OUTLINE

This code sets the line feed at a defined value with the
“A” previously described.

FUNCTION

One time line feed of n/72-inch

CODE

“J” n
(1B)

(4A)

DEFINITION RANGE

255

OUTLINE

This code activates the n/72-inch paper feed once.

FUNCTION

Set 1/12-inch line feed

CODE

“z” “0” or “z” <0>
(1B)

(7A)

(30)

or (1B)

(7A)

(00)

OUTLINE

Line feed is set at 1/12-inch after this code is received.