1. control codes used for character setting – Star Micronics SP300 Series User Manual
Page 36
– 32 –
7-1. Control Codes Used for Character Setting
FUNCTION
Select international character set
CODE
DEFINITION RANGE
(1B)
H
(52)H n
OUTLINE
(00)
H
n
(08)
H
Select the international character set corresponding to the
value set for n.
n =(00)
H
: U.S.A.
(03)
H
: England
(06)
H
: Italy
(01)
H
: France
(04)
H
: Denmark
(07)
H
: Spain
(02)
H
: Germany
(05)
H
: Sweden
(08)
H
: Japan
The default international characters can also be set with DIP
switches, however, setting by control code takes priority over
setting by DIP switches.
Refer to chapter 11-5 “Code Table”
FUNCTION
Select IBM character set #2
CODE
(1B)
H
(36)
H
OUTLINE
Selects IBM character set #2.
NOTE
This code is only valid when the character code table set by
DIP switches 2-1 and 2-2 is IBM character set #1 or #2.
FUNCTION
Select IBM character set #1
CODE
(1B)
H
(37)
H
OUTLINE
Selects IBM character set #1.
NOTE
This code is only valid when the character code table set by
DIP switches 2-1 and 2-2 is IBM character set #1 or #2.