SMC Networks SMC7004AWBR - Manual (Page 15)

5. In the “Domain Name”
field, key in the domain
name given to you by
your ISP (i.e.
xxx.yyy.home.com).
6. Click “Save” and then click “Reboot.”
7. When prompted to reboot now, click “OK.”
C. You may need to have your Barricade clone the MAC address
of your Ethernet adapter. Your ISP may register your MAC
address (a MAC address is a serial number that is unique to
every Ethernet adapter), and your Barricade needs to pass on
that address to your ISP. To do so:
1. Make sure that you are using the computer and Ethernet adapter
that was originally connected to your ISP.
2. Open your web browser (i.e. Internet Explorer or
Netscape Navigator).
3. In the “Location” field
(for Netscape) or “Address” field
(for Internet Explorer), type
“http://192.168.123.254” and
press .
6. Click “Save” and then click “Reboot.”
7. When prompted to reboot now, click “OK.”
B. Your ISP may require a domain name.
If your ISP does not require a domain name,
you must leave this field blank.
To enter your domain name:
1. Open your web browser (i.e. Internet Explorer
or Netscape Navigator).
2. In the “Location” field (for Netscape) or
“Address” field (for Internet Explorer),
type “http://192.168.123.254” and
press .
3. In the ”System Status” page
of the Barricade web console,
type your password in the
“System Password” field
(default is “admin”) and
click the “Log In” button.
4. Click “DHCP Server.”
English
English