Sanyo XACTI HD VPC-FH1GX - Manual (Page 197)

APPENDIC
E
S
English
176
Exposure control
type Programmable AE/Shutter speed priority AE/
Aperture priority AE/Manual exposure control
Exposure compensation available from the Shooting
Setting Screen (0 ±1.8 EV in 0.3 EV steps)
Light-measuring
mode Multi-section measuring, center-weighted
measuring, spot measuring
Range Normal mode:
50 cm (19.69 in.) to infinity
Super macro mode:
1 cm (0.39 in.) to 1 m (3.28 ft.) (Wide end only)
Digital zoom For shooting:
1
× to approx. 10×
For playback:
1
× to 62.5× (varies with resolution)
Shutter speed Still image shooting mode: 1/2 to 1/1,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/1,000 sec.)
Sequential shots mode: 1/15 to 1/1,000 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is set
to the lamp Q high sensitivity mode)
Sensitivity Still image shooting (standard output sensitivity*)/
video clip recording mode:
Auto (video clip recording: ISO 50 to 800; still
image shooting: ISO 50 to 200)/ISO 50, ISO 100,
ISO 200, ISO 400, ISO 800, ISO 1600, and
ISO 3200 (switchable from Shooting Setting
Screen)
h Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
h Maximum ISO sensitivity up to 1600 equivalent
when Scene Select function is set to Q.
h Recorded at ISO 1600 in the video clip
recording mode, even if ISO sensitivity setting
is z.