beautypg.com

Features – Samson VX2510 User Manual

Page 5

background image

3

The Hartke VX2510 & VX2515 bass amplifier offers all the newest concepts in bass

amplification. Here are some of its main features:

• Power to spare — The VX2510 & VX2515, a full 250 watts delivered to its internal

4 ohm speaker system.

• Internal, 2-way bass speaker system including two custom design 10-inch low

frequency drivers, plus 1-inch high frequency compression driver in the VX2510

and custom design 15-inch low frequency drivers, plus 1-inch high frequency

compression driver in the VX2515.

• Our unique Transient Attack® circuitry which ensures that every nuance of your

bass performance is reproduced faithfully.

• Two Pre-Amp input knobs, allowing custom blending of tube emulation and

solid state sounds.

• Ten bands of high-quality graphic equalization, allowing you to create a broad

range of tonal colors for your bass instrument. A dedicated in/out button allows

you to preset an equalization curve.

• Two fully adjustable contour knobs (high pass and low pass), which provide fur-

ther control over shaping your bass sound.

• A built-in compressor which not only adds real “punch” to your bass sound, but

also allows you to smooth out volume differences between notes.

• Two independent inputs that accommodate both passive and active bass gui-

tars.

• Protection relay circuitry that protects connected speakers from dangerous over-

loading and also prevents “thumps” when powering on or off.

• Effect loop send and return jacks that allow you to connect to professional out-

board effects processors.

• An effect Balance knob which enables you to adjust the relative amount of Send

(“dry”) versus Return (“wet”) effect signal being routed to the speaker outputs.

• Electronically balanced direct output that provides a means of routing signal to

professional mixing consoles in both live performance and recording environ-

ments. A ground loop switch helps prevent hum or buzz from entering the sig-

nal, and a pre/post switch allows the direct signal to be derived either before or

after the amp EQ section.

• Rugged construction makes the VX2510 & VX2515 eminently road-worthy.

Features

This manual is related to the following products: