SUPER MICRO Computer AS1020S-8 - Manual (Page 84)

7-14
AS1020S-8 User's Manual
7-4 Boot Menu
Boot Settings Confi guration
Quick Boot
If Enabled, this option will skip certain tests during POST to reduce the time
needed for the system to boot up. The options are Enabled and Disabled.
Quiet Boot
If Disabled, normal POST messages will be displayed on boot-up. If Enabled,
this display the OEM logo instead of POST messages.
Add-On ROM Display Mode
This setting controls the display of add-on ROM (read-only memory) messages.
Select "Force BIOS" to allow the computer system to force a third party BIOS to
display during system boot. Select "Keep Current" to allow the computer system
to display the BIOS information during system boot.
Boot up Num-Lock
Set this to "On" to allow the Number Lock setting to be modifi ed during boot up.
The options are On and Off.
PS/2 Mouse Support
This setting is to specify PS/2 mouse support. The options are Auto, Enabled
and Disabled.
Wait for ‘F1’ If Error
Enable to activate the Wait for F1 if Error function. The options are Enabled
and Disabled.
Hit ‘DEL’ Message Display
Enable to display the message telling the user to hit the DEL key to enter the
setup utility. The options are Enabled and Disabled.
Interrupt 19 Capture
Enable to allow ROMs to trap Interrupt 19. The options are Enabled and Dis-
abled.