SUPER MICRO Computer AS1020S-8 - Manual (Page 45)

Chapter 5: Advanced Serverboard Setup
5-11
H8DSR-8 Quick Reference
Jumpers Description Default Setting
JBT1 CMOS Clear See Section 5-10
JD1 Onboard Spkr En/Disable Pins 6-7 (Enabled)
JI 2 C1/2 I 2 C to PCI Enable/Disable Closed (Enabled)
JPA1 SCSI Enable/Disable Pins 1-2 (Enabled)
JPA2, JPA3 SCSI Channel A/B Term. Open (Enabled)
JPF Power Force On Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPXAO/JPXBO PCI-X Slot Freq. Select Open (Auto)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
1UIPMI IPMI 2.0 Header
COM1/COM2 COM1/2 Serial Port/Header
FAN1-5 Fan Headers
J1B4 Primary ATX Power Connector
J22 IPMB Header
J24 System Management Bus (PS) Header
J32 Secondary Power Connector
JA1 Ultra320 SCSI Channel A Connector
JB1 Ultra320 SCSI Channel B Connector
JD1 Power LED/Speaker Header
JF1 Front Panel Headers
JFDD1 Floppy Disk Drive Connector
JIDE1 IDE#1 Connector
JL1 Chassis Intrusion Header
JLAN1/2 Gigabit Ethernet (RJ45) Ports
JOH1 Overheat LED Header
JPW2 Processor Power Connector
JSLED1 SCSI LED Activity Header
JWOL Wake-On-LAN Header
JWOR Wake-On-Ring Header
SATA0-3 Serial ATA Connectors (SATA0/1/2/3)
USB0/1/2/3 Universal Serial Bus Ports (0/1) and Headers (2/3)
VGA Video (Monitor) Port
Onboard LEDs Description
DA1/DA2 SCSI Channel A/B Activity LEDs
DB1-DB8 POST Code LEDs
DP1 +3.3V Standby Power LED