SUPER MICRO Computer AS1020S-8 - Manual (Page 40)

5-6
AS1020S-8 User's Manual
Figure 5-2. Front Control Panel Header Pins (JF1)
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See Figure
5-2 for the pin locations of the various front control panel buttons and LED indica-
tors and refer to section 5-9 for details. Note that even and odd numbered pins
are on opposite sides of each header.
All JF1 wires have been bundled into single keyed ribbon cable to simplify their
connection. The red wire in the ribbon cable plugs into pin 1 of JF1. Connect
the other end of the cable to the Control Panel printed circuit board, located just
behind the system status LEDs in the chassis.
See the Connector Defi nitions section in this chapter for details and pin descrip-
tions of JF1.
NMI
x (key)
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Reset Button
Power Button
Ground
x (key)
Power LED
HDD LED
NIC1
NIC2
OH/Fan Fail LED
Power Fail LED
Ground
Ground
2 1
20 19
5-5 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-3 below for the colors and locations of the various I/O ports.