Sony CYBER SHOT DSC-HX200 User Manual

Page 26

ND Filter

Turn the internal ND filter on or off.

Metering Mode

Select the metering mode that sets which part of the
subject to measure to determine the exposure.

Cont. Shooting
Interval

Select the number of images taken per second for Burst
shooting.

Bracket Setting

Set the type of the bracket shooting.

Scene Recognition

Set to automatically detect shooting conditions.

Soft Skin Effect

Set the Soft Skin Effect and the effect level.

Smile Shutter

Set to the camera automatically release the shutter when
a smile is detected.

Smile Detection
Sensitivity

Set the Smile Shutter function sensitivity for detecting
smiles.

Face Detection

Select to detect faces and adjust various settings
automatically.

Flash Level

Adjust the amount of flash light.

Color Mode

Select the vividness of the image, accompanied by
effects.

Color Saturation

Adjust the vividness of the image.

Contrast

Adjust the contrast of the image.

Sharpness

Adjust the sharpness of the image.

Noise Reduction

Adjust the image resolution and the noise balance.

Anti Blink

Set to automatically shoot two images and select image
in which the eyes are not blinking.

Movie SteadyShot

Set the strength of SteadyShot in Movie Mode. If you
change the setting for [Movie SteadyShot], the angle of
view will change.

Position
Information*

Check the GPS triangulating status and update the
position information.

GPS Log REC*

Record the route taken while carrying the camera.

(Memory recall mode) to retrieve the

registered settings.

This manual is related to the following products: