Sony CYBER SHOT DSC-HX200 - Manual (Page 20)

GB
20
Setting the clock
1
Press the ON/OFF (Power) button.
Date & Time setting is displayed when you turn on the camera for the first
time.
• It may take time for the power to turn on and allow operation.
2
Select a desired language.
3
Select a desired geographic location by following the
on-screen instructions, then press z.
4
Set [Date & Time Format], [Daylight Savings] or
[Summer Time] and [Date & Time], then select [OK]
t
[OK].
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
Select the desired display color and the GPS setting
(DSC-HX200V only), following the instructions on the
screen.
• The battery pack will run out quickly when:
– [GPS setting] is set to [On] (DSC-HX200V only).
– [Disp. Resolution] is set to [High].
6
When an [In-Camera Guide] introductory message is
appeared on the screen, select [OK].
Control button
ON/OFF (Power) button and Power/Charge lamp
Select items: v / V / b / B
Set: z