Siemens GIGASET C88 - Manual (Page 36)

34
Press Keys:
Connecting the Base Station to a PBX
Connecting the Base Station
to a PBX
Your Gigaset may be operating behind a PBX.
Changing the Dialing Mode
It is necessary to change the dialing mode only if
your PBX does not operate with the preset tone di-
aling (DTMF – dual-tone multifrequency). Please re-
fer to the operating instructions of your PBX.
Options:
• Tone dialing (DTMF),
• Pulse dialing (P).
ееееееееееее
MENU Open the Menu.
еееееее ееееееееееееееееееееееееееееееее еееееее Z
BASE SETT
[ Scroll to Base Settings and press OK.
еееееее ееееееееееееееееееееееееееееееее еееееее Z
SPECIAL FCT
[ Scroll to Special Functions and press OK.
ееееееееееееееееееееееееееееееее еееееее
DIAL MODE
[ Select Dial Mode and press OK.
еееееее еееееее Z [ Scroll to the desired dialing mode and press OK.
Setting the Flash Time
Prerequisite:
Your PBX requires a flash time different from the
preset flash time. Please refer to the operating in-
structions of your PBX.
ееееееееееее
MENU Open the Menu.
еееееее ееееееееееееееееееееееееееееееее еееееее Z
BASE SETT
[ Scroll to Base Settings and press OK.
еееееее ееееееееееееееееееееееееееееееее еееееее Z
SPECIAL FCT
[ Scroll to Special Functions and press OK.
еееееее ееееееееееееееееееееееееееееееее еееееее Z
FLASH TIME
[ Scroll to Flash Time and press OK.
еееееее еееееее Z [ Scroll to the required flash time and press OK.
Options (in milliseconds):
80, 100, 120, 180, 250, 300, and 800
The current setting is marked with a 9 .