Siemens GIGASET C88 - Manual (Page 29)

27
Press Keys:
Handset Operation
Manual Registration
You may also manually register additional handsets
to your base station.
ееееееееееее
MENU Open the Menu.
еееееее ееееееееееееееееееееееееееееееее еееееее Z
REGISTER HS
[ Scroll to Register Handsets and press OK.
PIN is displayed.
еееееее o [ Enter the 4-digit system PIN (default: 0000) and
press OK (see page 33 for Changing System PIN).
ееееееееееееееееееееееееееее
REGISTER HS Entry will be flashing.
еееееее [ Press OK at the flashing prompt.
Underside of the base station
Hold down the Page/Registration key on the under-
side of the base station for approximately 10 sec-
onds until a signal tone is heard from the base sta-
tion.
If all internal handset numbers are assigned, the in-
tercom number 4 is reassigned. The handset that
has been registered under number 4 will be dereg-
istered.
When it has been successfully registered, the
handset reverts to the idle state.
De-registering Handsets
еееееее
INT Press the Intercom soft key.
еееееее еееееее Z Y Scroll to the handset to be de-registered.
ееееееееееее
MENU Open the Menu.
еееееее ееееееееееееееееееееееееееееееее еееееее Z
DE-REGISTER
[ Scroll to De-register and press OK.
PIN is displayed.
еееееее o [ Enter the 4-digit system PIN (default: 0000) and
press OK.
ееееееееееееееееееееееееееееееее еееееее
DE-REGISTER?
[ Press OK at the prompt.