Handset operation, Registering and deregistering handsets, Automatic registration – Siemens GIGASET C88 User Manual

Page 28

Press Keys:

Handset Operation

You can register and operate up to four three hand-

sets at the Gigaset C88 base station.

Registering and Deregistering
Handsets

The handset that comes with the system is auto-

matically registered with the base station. To regis-

ter additional handsets, follow the procedures de-

scribed in this chapter.

Automatic Registration

Automatic registration is possible for only the sup-

plied handset and any additional Gigaset C88 hand-

sets. Before using your handset, turn it off and

place it in the base station with the display facing

you. After approximately one minute, the handset

will be registered and its internal (intercom) number

is shown (for example, 2).
Up to twothree additional handsets may be added

to the system for a total of four handsets.
The next unassigned intercom number (2 through

4) is automatically assigned to the handset. If all

numbers are assigned, the intercom number 4 is re-

assigned.

. . .