Sun Microsystems SUN BLADETM X6440 User Manual
Sun blade
Table of contents
Document Outline
- Sun Blade™ X6440 Server Module Product Notes
- Sun Blade X6440 Server Module Product Notes
- General Information
- Sun Blade X6440 Server Module Tools & Drivers DVD
- Latest Firmware Updates
- Newly Supported Features
- Hardware and BIOS Issues
- ILOM BIOS settings issue
- ILOM IP address is not updated
- PEM fault light illuminates after hot-inserting into the server module
- Power LED issue
- Blade server module fails to link up at 1GbE
- Power supply redundancy must be set to non redundant mode
- BIOS does not accept the ipmitool persistent boot order change command
- BIOS does not accept the ipmitool clear CMOS command
- Certain devices’ boot option ROM fails to load
- NEM model X4238 requires latest BIOS firmware
- Sun Installation Assistant Issues
- LVM partitioning is not supported when installing SLES 10 SP2 operating system
- SLES 9 SP4 operating system is not supported using SIA
- SIA will not install Infiniband drivers for Windows operating systems
- SIA will not install FEM/NEM drivers for 32-bit Linux operating systems
- SIA will not install FEM drivers for Windows 2003
- RHEL installed using SIA reports a MPT Fusion ctl drivers error
- SIA displays ILOM version as Unknown
- SIA displays incorrect chassis information
- SIA does not display storage controllers
- SIA displays error when installing using PXE method
- SIA Update function fails
- SIA does not install operating systems via PXE server
- Integrated Lights Out Manager Issues
- Delaying BIOS Upgrade During Firmware Update Can Corrupt BIOS
- Minimum Supported Browsers
- No warning when password length is exceeded
- KVMS authentication does not work with remote authentication mechanisms
- Solaris Remote Console session requires Java plugin
- Service processor might take up to 3 minutes to start
- Error message appears during service processor startup
- FRU data for the hard disk drives is not passed via ipmitool
- impitool session info all command fails
- Hard disk error message in the SP event log
- DIMM SPD data are reported incorrectly in the FRU data
- Diagnostics Issues
- Operating System Issues
- Solaris Issues
- Linux Issues
- USB device errors reported in Red Hat 5.1
- Unable to hot plug PCI-E expansion modules (PEM)
- PCI BIOS error message might appear
- IGB error message might appear
- Error messages might appear in SLES 10 OS dmesg
- Only 8 of 16 CPU cores being reported
- Post OS driver update script fails to run
- SLES OS driver installation takes a long time to complete
- NIC drivers are not supported by SLES11 OS
- SLES 9 SP4 hangs during installation or startup
- USB devices are not recognized in RHEL 4.7
- Windows Issues
- Sun StorageTek RAID Expansion Module (REM) Issues
- LSI RAID Expansion Module (REM) Issues
- Sun Blade X6440 Server Module Product Notes