beautypg.com

Samsung SADPCI-202 User Manual

Page 30

background image

29

1. Video Menu:

CH Name:
Displays channel name. To change the channel name, move the
cursor by using Left/Right key. Then you can change the channel
name by using Up/Down key.
SAT:
Displays the satellite group the current channel belongs to. Y ou can
change the channel/satellite assignment by using the Left/Right keys.
Frequency:
Displays the channel frequency. You can change the frequency by
using the Left/Right keys or 0-9 keys for direct entry. Press F1 key
and hold the Left or Right key for 3 seconds to start auto video
frequency scan.
Polarity:
The polarity setting.
Skew:
Optional polariser control (up to 16 different configurations).
Note: Only on models fitted with the polariser control option
Bandwidth (option):
The selected IF bandwidth (default 27MHz).
Deviation (1-4):
Controls the video level (brightness) in four steps.
LT Level (option):
Where applicable, you can adjust the threshold (sensitivity) of your
receiver under weak signal conditions (32 steps).

Note:
Use OK key to store changes and ESC to exit menus.
You can use the auxiliary Left/Right keys to change channels whilst
in menu mode allowing quick changes to the settings of other

channels.

AUDIO P001

IO NO
33

FREQ-L

6.60MHZ

FREQ-R

6.60MHZ

MODE MONO
BANDWIDTH 280KHZ
DEMEMPHASIS 50US
50US

UP/DN, LR, 0-9, OK, ESC, MEN

2. Audio Menu:

Audio No:
Numbers 1-25 are factory pre-set audio sub-carrier frequencies
and 26-50 are user definable pre-sets. For complete audio preset
list, refer to the table in appendix 2.
Freq-L:
Displays the Left channel audio sub-carrier frequency.
Freq-R:
Displays the Right channel audio sub-carrier frequency.
Mode:
Selects between STEREO and MONO audio format.
Bandwidth:
Displays the selected IF bandwidth setting (selectable between
130/180/280/500KHz).
De emphasis:
Displays the selected de-emphasis (50uS/75uS/J17/DNR)

Note:
Only audio numbers 26-50 are user configurable.

Note: Radio Key
Radio channels are usually transmitted alongside video channels,
use the RADIO key to enable the blue screen. Should you wish to
block out the pictures press STORE to store this function to the
selected channel.

VIDEO

P001

CH NAME ALMAT V
SAT01 ARABSA 2A,3A
FREQUENCY 11.823MHZ
POLARITY

VER1

SKEW -45
BANDWIDTH 27MHZ
DEVIATION 4
LT LEVEL

01

UP/DN, LR, 0-9, OK, ESC, MEN

ALMATV P001

DDINT
P001

Radio

Radio