Samsung SADPCI-202 - Manual (Page 24)

23
TV/VCR settings:
The TV/VCR menu contains various options that allow you to configure the receiver to suit your
system:
Press Menu, select Installation to access the TV/VCR Menu:
The following options are available:
TV Type:
Select between a standard aspect ratio TV (4:3) or Wide-screen (16:9) TV.
16:9 mode is only active when a programme is transmitted in 16:9 format.
With a modern 16:9 TV, the switch to 16:9 mode is automatic if connected via a full SCART.
With a modern 4:3 TV, 16:9 mode will produce a “Letter Box” format if connected via a full SCART.
UHF Channel:
Use this option to change the TV UHF modulator output channel. The default channel is CH38. If this
is already occupied by a local TV channel, VCR or you are experiencing picture interference, use this
option to re-tune your satellite receiver to a different UHF channel. Remember to re-tune your TV and
VCR to the new channel.
Enable TV SCART RGB:
When OFF, the TV SCART outputs composite video signal. If you have a RGB compatible TV,
switch this option to ON to enjoy better picture quality.
Enable TV SCART S-Video:
Select this option only if your TV is S-Video compatible.
Note: 1. If your TV is not compatible, a Black and White picture will result.
2. This option is NOT available if TV SCART is set to RGB.
Enable VCR SCART S-Video:
Select this option only if your VCR is S-Video compatible.
Note: 1. If your VCR is not compatible, a Black and White picture will result.
2. This option is NOT available if TV SCART is set to RGB.
TV T
TV Type
UHF Channel
Enable TV SCART RGB
Enable TV SCART S-Video
Enable VCR SCART S-Video
Standard (4:3)
38
OFF
OFF
OFF