Sima Products Sima SUR-47 User Manual

Page 16

Getting Started

SUR-47 User’s Manual

Using Pre-Code to Program Devices

Follow these instructions to program a device using preprogrammed codes.
Press

to select PRE-CODE，and then press OK.

Manually Selecting the Code
1.

Turn on the device you want

to program the SUR-47 to

control.

2. Select

the

device

(for

example TV).

3. Check

the

preprogrammed

code list that was bundled
with the SUR-47 for the four-

digit code number of your

device. If no code is
displayed, that means this

device has no pre-code.

Enter the four-digit code
number and press YES button

to confirm the entry.

Note: If the code only has

one digit (for example, 0001),

you do not have to input the
preceding zeros; in this

example, press ‘1’.

Press the POWER button to

test the code. The device
you are trying to control

should turn on (or off) as you

press this button. If not, return
to Step 2 and try another

code.

You can also press

to decrease or increase the four-digit code

number.
Note: Some codes are designed to operate more than one model. It
may take several tries to find the code that works with your unit.