SMC Networks SMC2804WBR - Manual (Page 3)

Once you have all of your computers connected, you are ready to
install the EZ 3-Click Installation Wizard.
• Remove the CD-ROM from the box.
• If the computer is off, turn it on.
• When the computer boots up, insert the CD-ROM into the
CD-ROM drive of the computer that is connected to the
Barricade
™ g.
Note: The screen shown to below will appear only if the Autorun feature
is enabled. If the EZ 3-Click Installation Wizard does not start
automatically, follow the steps below to start the program:
1. Double-click the [My Computer] icon.
2. Double-click on CD-ROM or Compact Disc icon to view the
contents of the CD.
3. Click on the [EZ Install] Icon to launch the program.
English
English
Connect all of the computers that you want to have share your
Internet connection. This is necessary to detect that each device
is properly connected. It is safe to connect and disconnect
Ethernet cables from your computer(s), Barricade
™ g, or broadband
modem when it is turned on.
Use the diagram below to assist you with setting up your network:
Note: Please use standard Category 5 (CAT-5) Ethernet cables with RJ-45
connectors.
3 4
Step 2... Get Connected
Computer One
Power
Adapter
Broadband
Modem(Cable/DSL)
Ethernet
Cables
To Computer
Two
To AC Wall
Outlet
PDA with
Wireless Compact
Flash Card
Step 3... Begin
Macintosh Users!
If you are setting up the Barricade ™ g Router in an ALL
Macintosh network, please see Appendix A for specialized
directions on configuring and setting up the Barricade
™
manually. The EZ 3-Click Installation Wizard is not compatible
with the MacOS.