Samsung Digimax 130 - Manual (Page 39)

Setting up the function by using the LCD monitor
39
SETTING UP THE FUNCTION
Turn the power on.
Set the camera to PLAY mode.
By pressing the Menu button, the PLAY menu is
displayed on the LCD monitor.
Use the Menu select button to select COPY TO CF CARD.
Press the Enter button and the cursor will skip to the data field.
Use the Menu select button to select data.
When you press the Enter button after selecting YES
[message 1] will be displayed on the LCD monitor and
[message 2] will be displayed after copy has been completed.
Press the Enter button and the cursor will return to
the PLAY menu automatically.
Press the Enter button after selecting NO and the cursor
will return to the PLAY menu automatically.
Press the Menu button again to make the PLAY menu disappear.
COPY TO CF CARD
Copy the recorded images on the internal memory to CF CARD.
[message 1]
[message 2]
1
2
3
4
5
6
7
Note
A NO CARD message will be displayed on the LCD monitor and the camera will make
beep sounds when you press Enter button after selecting YES, should the CF CARD not
have been inserted.
Should this be the case, press the Enter button and turn the power off.
Then insert the CF CARD and repeat 1-6.
A
D
V
A
N
C
E
D
PLAY MENU
YES NO
LCD BRIGHTNESS
SLIDE SHOW
COPY TO CF CARD
DPOF
MESSAGE
NO CARD
OK
MESSAGE
PLEASE WAIT
MESSAGE
ALL IMAGE COPIED
OK