Samsung Digimax 130 - Manual (Page 38)

SETTING UP THE FUNCTION
Setting up the function by using the LCD monitor
38
Press the Enter button again to make the change.
The SLIDE SHOW will start.
If you want to stop the SLIDE SHOW, press one of the following buttons :
LCD button, Menu button, Enter button and Menu select button
and camera turns to PLAY mode.
7
8
Reference
When the SLIDE SHOW starts without images on the internal memory or CF CARD,
the following message will appear.
This setting is reset to 2 minutes when the camera power is off.
MESSAGE
NO IMAGES