Sony Cyber-shot DSC-F828 - Manual (Page 10)

10
Please push the "RESET" button with some sharp pointed item
Note that all settings except language and Video out will be initialised again after pushing the "RESET"
button.
("RESET" Button)
Check the firmware version in your camera
•
Turn the mode-switch to SETUP.
•
While pressing the menu button, turn the camera on.
•
Select SETUP 2 > VERSION and check the Version number.
•
It should be the new one.
Possible problems during re-updating
If the access lamp of the Memory Stick blinks during re-updating or the access lamp doesn't
turn off after 3 minutes, a failure may have occurred with the camera or the Memory Stick
media.
Solution:
Please contact a local Sony Service Center for repair options.
(C) Copyright 2003 Sony Europe BV, all rights reserved.
Sony, Cyber-shot and Memory St ick/ Memory Stick PRO are registered trademarks of Sony Corporation, Japan.
Other names and products may be trademarks of their respective owners.