Samsung C6435(P) - Manual (Page 32)

❚ Camera setup
CAMERA ID
This CAMERA ID menu is used to assign a camera ID to this camera. If you press the Setup
switch when the CAMERA ID menu is selected, the corresponding setup screen appears.
You can input a camera ID composed of alphabets, numbers, and special characters up to 20
characters long. The input camera ID can be displayed at the desired location when using the
LOCATION… submenu. When you press the Setup switch in RET, the screen returns to the
upper menu.
V-SYNC
In the V-SYNC menu, vertical synchronization can be selected. The vertical synchronization
signal supported by the camera is the INT mode made by clock inside the camera and LINE
mode adjusting vertical synchronization to the exterior power frequency.
(CAMERA SET)
CAMERA ID ON...
V-SYNC INT
DAY/NIGHT DAY...
MOTION DET OFF
ZOOM SPEED 4
DIGITAL ZOOM OFF
DISPLAY ZOOM OFF
DISPLAY P/T OFF
EXIT QUIT
(CAMERA ID)
A BCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789 : ! - + * () /
RET
SP ▶▶ ◀◀ SP LOCATION...
C AMERA-1...........