Seiko Group BP-6000 - Manual (Page 35)

Selecting page length for fanfold paper
The page length selection varies`1` roughly from 2 inches to 22 inches according to the given
options.
When CODE is selected, the page length can be changed by a software command. When the
page length is other than CODE, it is a fixed length and a software command is ignored. The
page length is the same as the distance between two perforations.
3 PAGE FANFOLD
PAGE: CODE
PAGE: 2 INCH
PAGE: 2.5 INCH
PAGE: 3 INCH
PAGE: 4 INCH
PAGE: 4.5 INCH
PAGE: 5 INCH
PAGE: 5.5 INCH
PAGE: 7 INCH
PAGE: 8 INCH
PAGE: 8.5 INCH
PAGE: 10 INCH
PAGE: 11 INCH
PAGE: 12 INCH
PAGE: 14 INCH
PAGE: 15 INCH
PAGE: 16 INCH
PAGE: 16.5 IN
PAGE: 17 INCH
PAGE: 22 INCH
.................... Default page length is 11 inches.
The default page length can be set to 12 inches at
"
8.DEFAULT PG LNG " in the extended setup
options on page 38.
TOF (Top Margin)
Lowest Bottom Margin
(when skip perforation
mode is enabled)
Page Length
Print prohibited area
0/72"
or more
Skip
perforation area
28
4. Basic setup options (3)