Sony CMT HPZ7 - Manual (Page 28)

28 GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A ANALOG IN jack
Use audio cord (not supplied) to connect an
optional analog component (MiniDisc player/
recorder or Portable Audio player, etc.) to this
jack. You can then record or listen to the sound
from the component through this system.
B CD DIGITAL OUT jack
Use a digital optical cord (square, not supplied)
to connect an amplifier, MiniDisc player/
recorder or DAT deck with a digital optical input
jack. Sound is then output when the system
function is set to CD. If the jack is covered with
a cap, remove it before use.
Notes
• There is no digital audio output from this jack during
playback of ATRAC3plus/MP3 tracks.
• You cannot make a digital recording of a copy
guarded disc using a digital component connected to
this system. Also, playback may not be possible
depending on the connected component.
• Before connecting or disconnecting the audio cord
(not supplied), press VOLUME – repeatedly (or turn
the VOLUME control on the unit counterclockwise)
to turn down the volume.
Optional Components
Hooking up optional components
+/1
HS
i
s
HS
A
lj JL
Optional analog component
From the audio output jacks of
an optional analog component To the digital input jack of an
optional digital component
Optional digital component