SATO MB200/201i User Manual

Page 33

Text mode
Original mode

Operation and Configuration

3-3

Printing via the RS-232C Interface

Use the following procedure to print by connecting to
a computer or a handy terminal through an RS-232C
cable option.

1. Locate the RS-232C

interface port cover and lift
it up to expose the port.

2. Plug one end of the RS-

232C cable firmly into the
port. Make sure that the
arrow mark on the
connector of the RS- 232C cable matches with the
arrow mark by the side of the printer’s port.

3. Plug the other end of the RS-232C cable to the

corresponding RS-232C connector of the computer
or handy terminal. For information on the host
device RS-232C connector, refer to the relevant
instruction manual.

MB20xi A6.book Page 3 Friday, May 27, 2005 5:12 PM