SATO MB200/201i - Manual (Page 20)

Setup
2-6
Notes:
• If the POWER lamp does not light when you turn on
the power, check the power cord connection.
• If the CHARGE lamp does not light at the start of
charging, make sure the battery pack is firmly
mounted into the charger. Poor mounting of the
battery pack may result in faulty charging.
• When the fully charged battery pack is placed into
the battery charger, the CHARGE lamp turns on
and then off. In the case of the five-socket charger,
the CHARGE lamp lights green.
• When charging a battery pack that has not been
used for a long time, the CHARGE lamp may blink
for a while. This does not indicate an error. You can
continue charging.
• The battery pack can be recharged over about 300
times (when used at normal temperatures). If the
battery pack is fully charged but runs out quickly,
replace it with a new battery.
Charging Time
It takes about 2.5 hours for a fully discharged battery
pack to return to a fully charged state.
MB20xi A6.book Page 6 Friday, May 27, 2005 5:12 PM