Service & adjustments – Swisher ZT2460 User Manual
Page 24
24
SERVICE & ADJUSTMENTS
Seat Adjustment
Engine to Deck Belt
9 Apply parking brake
9 Lower the deck to its lowest position
9 Disconnect tension idler
9 Remove belt from the mower deck and the
electric clutch
Removal
9 Install new belt by placing it around
the electric clutch and route it through
the idler and around the deck pulley.
Refer to routing diagram below.
9 The belt will be loose at this time
9 Tightly secure the belt tension back
to its original position
Replacement
9 The Swisher ZT2460 is equipped with a 6” range sliding seat.
9 Release the tension on the seat adjustment lever by pushing
the yellow tip lever to the left. See features section in this manual
9 Using your own weight, slide the seat to the desired position
9 Release the lever