Full function remote control programming, Example for programming a macro sequence – Simaudio Preamplifier and D/A converter User Manual

Page 18

MOON Stargate Processor

Full Function Remote Control Programming

Example for Programming a Macro Sequence

To program the

button in the AVC mode to power on the receiver, power on the CD, power on the

TV and power on the VCR:

Step 1:

Press the AVC button and MUTE buttons simultaneously. Hold both buttons until the red light
under the AVC button turns on. The red light will blink once during each subsequent press of a
button.

Step 2:

Press the M1 button to select the M1 macro.

Step 3:

Programming the M1 macro button: Press the AVC button to select the AVC Power command.

Press the CD Device button to select the CD mode. Press the MUTE button to select the CD
Power command. Press the TV Device button to select the TV mode. Press the MUTE button to

select the TV Power command. Press the VCR Device button to select the VCR mode. Press the
MUTE button to select the VCR Power command.

Step 4:

Press the CH ! button. The red light under the AVC button will blink twice and then turn off
indicating that the macro sequence has been stored.

____________________________________________________________________________________

Full Function Remote Control Programming