Full function remote control programming, Erasing a learned command from a button – Simaudio Preamplifier and D/A converter User Manual

Page 16

MOON Stargate Processor

Full Function Remote Control Programming

Erasing a Learned Command From a Button

Step 1:

Press the Device button and SELECT buttons simultaneously and hold until the orange Status

LED and the Device button turn on and remain lit.

Step 2:

On the remote control, press the button that is to be erased. The orange Status LED will flash
continuously and the Device button will turn off.

Step 3:

Press the LIGHT button. The green status LED will flash twice, then turn to a steady orange. The

Device button will turn on.

Repeat

From Step 2 for any other buttons to be erased in the selected Device mode.

Step 4:

To exit this feature, press and hold the Device button and the SELECT button simultaneously

once again. The orange Status LED will flash twice and then turn off. The Device button will turn
off.

Erasing All the Learned Commands in One Device Mode

Step 1:

Press the Device button and SELECT buttons simultaneously and hold until the orange Status
LED and the Device button turn on and remain lit.

Step 2:

Press and hold the LIGHT button. The red Status LED will flash five times. Release the LIGHT

button. The Status LED will then flash green twice and then the Device button will turn off. The
Status LED will go to a constant orange indicating that all the learned information on buttons in
the Device mode have been erased. The Device button will turn on.

Step 3:

To exit this feature, press and hold the Device button and the SELECT button simultaneously.

The orange Status LED will flash twice and then turn off. The Device button will turn off.

Erasing All of the Learned Commands in All Device Modes

Press and hold the

Device button and the

LIGHT

button simultaneously. The red Status LED will

flash continuously. The Status LED will then flash green once, orange once and then turn off, indicating

that all of the learned commands on all of the Device modes on the remote control have been erased.

Warning: This procedure will erase all learned commands on all buttons

in the CD, DVD, AUX, SAT, TV, VCR and CBL device modes.

____________________________________________________________________________________

Full Function Remote Control Programming