Full function remote control operation – Simaudio Preamplifier and D/A converter User Manual

Page 14

MOON Stargate Processor

Full Function Remote Control Operation

The supplied remote control (figure 9) can operate up to eight (8)
different components and is programmable via a learning mode. The
eight (8) buttons located on the top 2 rows allow you to select the

component you wish to operate. Please refer to the next section
“Remote Control Programming” for instructions on how to manually
program this remote control.

To operate the Stargate with this remote control you must first press

the button labeled

‘AVC’

on the top left corner.

POWER:

Puts the Stargate into “Standby” mode. This button cannot

turn the unit on; you must use one of the input selection buttons
located further down on the remote (i.e.

DVD, LD, VCR1, VCR2,

etc.).

MUTE:

Places the unit in Mute mode – no output volume.

T/V

: Toggle between NTSC and PAL video system (for OSD only).

CH !

and

CH ":

Seek up/down AM/FM tuner frequency.

VOL !

and

VOL ":

Adjusts output volume up/down.

GUIDE:

The “Status Display” appears on screen.

MENU:

The on screen “Setup” Menu appears on screen.

EXIT:

Exit from the on screen Menus.

SELECT ! # " $

cursors used for SYSTEM SETUP functions

DVD, LD, VCR1, VCR2, SAT, AUX, CD, TV, TUNER, TAPE

and

7.1:

Selects a source input and turns unit on from “Standby” mode.

SURR:

Places the processor into Surround mode.

STEREO:

Places the processor into Stereo mode.

MUSIC 7:

Places the processor into 7.1 music mode.

MODE:

Toggles between Dolby Surround Pro Logic

II Music, Dolby

Surround Pro Logic

II Movie, DTS Neo:6

Music and DTS

NEO:6

Cinema modes.

BASS:

Sets the bass trim for the currently selected input.

thru

10:

AM/FM Tuner Presets. To save the current radio station as

a ‘Preset’, press and hold one of the 10 preset buttons until

the sound mutes for approximately ½ second.

ZONE:

Activate remote for ‘Zone 2’ function control (i.e. volume, seek,

input source selection, mute, off)

LIGHT:

Turns on the remote’s backlighting (will auto shut off).

Figure 9

SHIFT:

Toggle between AM and FM on the tuner.

This remote control uses four (4) AAA batteries which are included.

____________________________________________________________________________________

Full Function Remote Control Operation