Siemens 2010 - Manual (Page 6)

– 6 –
- English -
19.04.2000 euroset 2010,IM1, A31008-E2010-B100-2-3S19 2010-
❏ Mute
You can deactivate the telephone handset and microphone during a call.
Neither you nor the called party will hear each other. The connection is
maintained and is indicated by the playing of music on-hold.
❏ Setting the handset volume
There are 2 handset volume settings (factory setting: level 1).
❏ Activating/ deactivating the key confirmation tone
A “confirmation tone” is activated as an acoustic check that the telephone
has registered each individual key pressed. You can activate and deacti-
vate the confirmation tone as you require:
❏ Locking/ unlocking the telephone
Call numbers cannot be dialed when the telephone is locked, however in-
coming calls can be received.
Operation at private PABXs
❏ Entering/deleting exchange codes
If you are using your telephone on a private PABX, you may need to store
one or more exchange codes. A dialing pause of 3 seconds is automatically
set when the exchange code is saved.
L Press the mute key during the call.
To reactivate the handset and microphone:
Press the key again.
> " Lift the handset, then start the function.
or 1 = Soft,
2 = Loud.
" < Press the set key, then replace the handset.
>" Lift the handset, then start the function.
or 0 = Confirmation tone off,
1 = Confirmation tone on.
" < Press the set key, then replace the handset.
> " Lift the handset, then start the function.
or 1 = Lock,
0 = Unlock
" < Press the set key, then replace the handset.
> " / Lift the handset then start the function.
" <
(a) To d delete all exchange codes:
Press the set key and replace the handset.
J
(b) To e enter an exchange code:
Enter a one- to three-digit exchange code.
/ J
If you want to enter another exchange code:
Press the redial key and enter the next exchange
code.
" < Press the set key, then replace the handset.