Samsung YP-MT6 - Manual (Page 25)

49
Setting the System Setting the System
48
√ √ Resume
Press and hold the "M" button. Select Settings → System.
● Use , to select Resume On or Off.
● On: Play back will resume from the point it was
previously stopped.
● Off: Play back will resume from the beginnng of the
file/track that was playing when stopped.
√ √ Default vol
● Use , to set the default volume to a level between
0 and 30.
● If the power is turned on again after having adjusted the
volume to a level above the default volume
(for example: 20) music is played at the default volume level.
● If the power is turned on again after having adjusted the volume at or below the default
volume (for example: 20 or lower), the music is replayed at the previous volume.
√ √ Tuner Region
● Use , to select FM Tuner Region.
● Worldwide : Search FM frequency between 87.5MHz to
108.00MHz in increments of 50 KHz.
● US : Search FM frequency between 87.5MHz to108.0MHz in
increments of 100 KHz.
● Japan : Search FM frequency between 76.0MHz to 108.0MHz
in increments of 100 KHz.
√ √ Tuner Level
● Use , to select FM Tuner Sensitivity.
● The higher the FM Tuner Sensitivity,
the more frequency it can receive .
● High → Middle → Low
√ √ Default Set
● Use , to select Default Set Yes or No.
● Yes : All settings selected will revert back to the player
default settings.
● No : All settings selected will remain as they are.
√ √ Beep
● Use , to select Beep On or Off.
● On: Beep sounds whenever you press the button.
● Off: No beep sounds when you press the button.
√ √ About
● If you select About, you can check the software
version information, total number of tracks and
remaining capacity.
N N N N o o o o tt tt e e e e
- Go to samsung.com for software updates.
✍