SOYO Motherboard SY-6BA+ IV - Manual (Page 26)

Hardware Installation SY-6BA+ IV
22
2-3.1 CPU Installation
Your SY- 6BA+ IV motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Slot 1 CPU
connector on the motherboard.
Mark your CPU Frequency: Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
FSB 66MHz
266MHz (66 x 4.0) 333MHz (66 x 5.0) 400MHz (66 x 6.0)
300MHz (66 x 4.5) 366MHz (66 x 5.5) 433MHz (66 x 6.5)
FSB 100MHz
350MHz (100 x 3. 5) 450MHz (100 x 4.5) 550MHz (100 x 5.5)
400MHz (100 x 4.0) 500MHz (100 x 5.0) 600MHz (100 x 6.0)
Follow these instructions to install your Slot 1 processor correctly.
Ø Retention Module