Sony WHG-SLK1I - Manual (Page 104)

WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
104 GB
Specifications
Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(WHG-SLK1i The United States model
only)
With 8 ohm loads, both channels driven,
from 120  10,000 Hz; rated 35 watts per
channel minimum RMS power, with no
more than 1% total harmonic distortion
from 800 milliwatts to rated output.
Amplifier section
The following measured at AC 120 V, 60 Hz
(North American model)
The following measured at AC 127 V, 60 Hz
(Mexican model)
The following measured at AC 127 V 
240 V, 60 Hz (Brazilian model)
The following measured at AC 220 V 
240 V, 50/60 Hz (European, Korean,
Argentine, Thai and Australian models)
The following measured at AC 120 V 
240 V, 50/60 Hz (Other models)
WHG-SLK2i
Brazilian model:
Power output (rated):
85 W + 85 W (at 6 Ω, 1 kHz,
1% THD)
RMS output power (reference):
100 W + 100 W (per channel at 6 Ω,
1 kHz, 10% THD)
Other models:
Power output (rated):
85 W + 85 W (at 6 Ω, 1 kHz,
1% THD)
RMS output power (reference):
120 W + 120 W (per channel at 6 Ω,
1 kHz)
WHG-SLK1i
The United States model:
RMS output power (reference):
65 W + 65 W (per channel at 8 Ω,
1 kHz)
Other models:
Power output (rated):
40 W + 40 W (at 8 Ω, 1 kHz,
1% THD)
RMS output power (reference):
65 W + 65 W (per channel at 8 Ω,
1 kHz)
Inputs
VIDEO/SAT VIDEO IN:
1 Vp-p, 75 Ω
VIDEO/SAT AUDIO IN:
voltage 250/450 mV, impedance
47 kΩ
Outputs
DVD VIDEO OUT:
max. output level 1 Vp-p, unbalanced,
Sync negative, load impedance 75 Ω
PHONES:
accepts headphones of 8 Ω or more
SPEAKERS:
Use only the supplied speakers
SS-SLK2i (WHG-SLK2i) or SS-SLK1i
(WHG-SLK1i).