Function lamp, Sound – Samsung A63 User Manual

Page 82

If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.

Setting Operation Sounds

1. In any mode with the exception of Voice Recording mode,

press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [SOUND] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH

5. Press the menu button twice and the menu will disappear.

Sound

Description of the Function lamp

Function Description

During power-on

After an image is captured

During voice recording

While recording a movie clip

Function lamp

When the self-timer is
activated

Even if the function lamp is set to OFF, the self-timer lamp will work.
(See page 34.)

Function lamp blinks and then turns off when the camera is ready to
take a picture

Function lamp will blink once.

Function lamp will blink at a 1-second interval.

SETUP

IMPRINT

LAMP

SOUND

BACK:

SET:OK

OFF

LOW

MEDIUM

2816