Sony WALKMAN MZ-R50 - Manual (Page 33)

33
-EN
Error message
NO COPY
NO DISC
NO SIGNAL
Meaning/Remedy
•You tried to make a copy from a disc that is protected by the
Serial Copy Management System. You cannot make copies
from a digitally connected source which was itself recorded
using digital connection.
b Use analog connection instead (page 6).
•You tried to play or record with no disc in the recorder.
b Insert an MD.
•The recorder could not detect digital input signals.
b Make sure that the source is connected firmly (page 11).
•You tried to record or edit on a premastered MD (P/B means
playback.)
b Insert a recordable MD.
•You tried to record or edit on a MD with the tab in the record-
protect position.
b Slide the tab back (page 28).
•You tried to erase a track mark while playing the MD or at the
beginning of the first track.
•You tried to erase a track mark to combine tracks the recorder
cannot combine (caused by system limitation).
•Heat has built up in the recorder.
b Let the recorder cool down.
•There is no more space for new data when you are editing the
MD.
b Erase unnecessary tracks (page 21).
•You tried to record or edit on a track that is protected from
erasing.
b Record or edit on other tracks.
P/B ONLY
PROTECTED
SORRY
TEMP OVER
TR FULL
TrPROTECT